Four (4) Items for Sale by Paul “Scooter” Dyson, KK4YVE on Dec. 26, 2020

Listed by Carolyn & “Scooter” Dyson
6403 GA Hwy-23, Waynesboro, GA 30830  –  (706) 554-2619

1. Gently
 The Icom IC-746 Pro covers 160-10 meters plus 6 and 2 meters all mode. 100 Watts of output is available on all bands – HF, 50 MHz and 144 MHz, making the IC-746 Pro a practical choice for all-around base station use. The die-cast aluminum chassis and a large cooling fan help to stabilize the PA circuit, providing 100% full duty cycle operation. The  version features 32 bit floating point DSP and 24-bit AD/DA converter. This combination dramatically improves receiver performance providing ultra wide dynamic range and good third order intercept point. And there are NO more expensive optional filters to buy. The digital IF filter allows you to select 51 filter bandwidths. There are three user selectable filter memories per mode. Soft and sharp filter shapes can be selected in both SSB and CW modes independently. You can also change the settings on the fly and compare! For repeater operation, there’s is a built-in tone encoder and decoder with 50 CTCSS and 108 DTCS based tones. There is even a built-in Baudot RTTY demodulator. It has 100 alphanumeric memories, digital RF speech compression, spectrum display, Manual and Automatic Notch, digital Twin PBT, Noise Blanker, CTCSS encode/decode, APF, two stage preamp, automatic antenna tuner and electronic keyer. A built-in automatic antenna tuner operates on the HF bands plus 6 meters. The 746Pro requires 12 VDC at 23 Amps. 11.3×4.8x12.5 inches. 20 lbs.

Very good, very clean condition. One owner… From non-smoking house and works as it should. Includes Mic and power cord. $550 + shippingAll manuals:

2. Rarely Used ICOM IC-7300Practically brand new! Non-smoking house.

The Icom IC-7300 is Icom’s latest SDR HF/50 MHz Transceiver. It offers 100W of output power and receives from 0.030 to 74.800 MHZ. It operates on SSB, CW, RTTY, AM and FM modes. The Icom IC-7300 features a RF direct sampling system, 15 discrete band-pass filters, a real-time spectrum scope and a large 4.3″ color touch screen display. Additional features of the IC-7300 include a built-in automatic antenna tuner, 101 channels, SD memory card slot and 3 CW functions. In the original box you will find the IC-7300 transceiver, a HM-219 hand microphone, DC power cable

$750 includes IC-7300 transceiver, hand mic & power cable.

3. SPE Expert 1.3K-FA Linear Amplifier


Powerful: 1.3kW PEP typ. (+/- 0.5dB)

  • Used very little – smoke free environment

  • Very Light: Less than 22 lbs. (10 kg.)

  • Very Small: height 4.72″ x width 11.02″ depth 14.17″, connectors included.

  • Wide Frequency Coverage: 1.8Mhz to 54MHz, including WARC.

  • Internal Switching Power Supply with Power Factor Correction.

  • No jumper changes necessary to work from 100VAC to 255VAC.

  • Manages 4 antennas automatically.

  • Automatically switches between 2 transceivers.

  • S02R operation.

  • ATU Built-In: bypassable per antenna and band.

  • Up to 2 antennas can be selected for every band.

  • Additional receiving antenna can be selected.

  • Drives directly up to 4 dynamic antennas (StepplR, Ultrabeam) for an easiest layout.

  • No relay contacts are switched when current is flowing due to special software.

  • QSK.

  • Fully remotable.

  • Remote control and all software upgrades fully available on SPE website.

  • USB and RS 232 ports.

  • MAX (1500W), MID(1000W) & LOW(500W).

  • Very clean and low distortion signal.

  • Both inputs always perfectly matched.

  • Quiet Operation: 4 fans linearly controlled by power supply and power amplifier temperatures.

  • Fully protected.

  • Fully Solid State: uses only one new, very rugged device.

  • Over 30,000 lines of software for performances that cannot be found together in any other amplifier.

  • Two very fast CPUs.


4. Diamond SG-7500 Vertical 2M/70cm MHz Antenna

40.6 Inches tall – NMO Connector – Antenna only – No mount

New: $72 Asking: $30 in very good condition 


Mobile Antenna Band

Frequency Coverage Range

Vertical Antenna Gain

Element Phasing (wavelength)

2 meters

144-148 MHz

3.5 dBi


70 centimeters

440-450 MHz

6.0 dBi

2 x 5/8

Diamond Antenna Dual-Band Mobile Antennas are a great combination of price, quality, and versatility! You can find the exact combination of features you want to suit any dual-band mobile antenna need. Generally speaking, the higher you want the gain to be, the taller the antenna will be. Taller antennas may not be suitable for magnetic mount, so other mounting options are available. Shorter antennas are more convenient but will generally have lower gain. Antennas with the ‘fold-over’ feature offer yet another solution!

Proudly powered by WordPress | Theme: Baskerville 2 by Anders Noren.

Up ↑

Don't miss out on the good stuff... Get every new post from the Burke Amateur Radio Club delivered to your inbox!!!
Keep up-to-date with all the BARC news! Get every new post from the Burke Amateur Radio Club delivered to your inbox!!!
Powered By